Worldwide Installations

Shreeji Expeller Industries

Facebook Twitter Pinterest

Estd. 1992

Manufacture & Exporter of Oil Mill Machinery & Vegetable Oil Refinery Plant

Shreeji Expeller IndustriesShreeji Expeller Industries

Home » Products » Oil Expeller / Oil Screw Press » Palm Kernel Oil Expeller Extruder

Palm Kernel Oil Expeller Extruder

Owing to the wide experience of this domain, we are instrumental in offering a superb quality assortment of Palm Kernel Oil Expeller Extruder to our customers. This Palm Kernel Oil Expeller Extruder is widely preferred amongst clients for its impeccable quality. Offered product is available at competitive price.


All Steel Fabrication & Improved Design
For perfect alignment and stability.

Vertical Hinged 44" Four-section Pressing Box.
Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves a lot of time and labour.

Steel Casted Chambers
Reduces time and labour for relining of Cage Bars.

Shaft Withdrawal
The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way and pressure worms and spacing collars can be changed without disturbing the shaft. The thrust of the pressure worm is taken upon a large thrust bearing.

Pressure Cone
The final pressure of the cake is positively controlled by a Pressure Cone which is hard faced.

Cake at Discharge
The cake thickness is controlled by a manually operated hand-wheel which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on expeller motor.

Compressor
The Expeller feed is under automatic control and the seed or meal when entering the Expeller is given a preliminary compression by a small crammer-shaft driven by an automatically tensioned belt which stops when feed is excessive, starting again when the accumulation of feed has been absorbed by the Expeller.

Power
Oil Expeller is 15HP/20HP and for Cooker 3HP.

Gear Box & Lubrication
A double helical gear unit made from most suitable special steel running in oil bath. All shafts run on antifriction bearings. The drive housing is oil tight and dust proof, totally enclosed design and is fitted with two oil level indicators.

Kettle / Cooker
The Steam Kettle is of adequate capacity with 42” dia. two high steam jackets fitted with self controlled mean inlet to prevent overflowing with open steam spray arrangement, safety valve, steam pressure gauge, steam traps and steam valves. The Kettle requires 40-55 kgs. process steam per hour at a pressure of 4-5 kg/cm2.

Capacity
The capacity, however, varies with the material and working conditions. The average capacity is 8/10 tons in first pressing and 5/6 tons in second pressing.

*Capacity differs with material density & quantity of oil in it.




Palm Kernel Oil Expeller Machine

Matching up with the ever increasing requirements of the customers, our company is engaged in providing Palm Kernel Oil Expeller Machine. This Palm Kernel Oil Expeller Machine is tested on numerous quality stages by our experts before final dispatch. Offered product is available at market leading price.


  • GearBox: Double reduction Gear box
  • Kettle / Cooker: Multi stage cooker for the conditioning of seeds, size 42" Diameter
  • Chamber: Vertical Hinged and can very easily be opened for replacement of worms or cage bars. This saves a lot of time and labour
  • Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars
  • Bearings: Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
  • Compressing: Crammer Shaft gives extra Cramming of the seed or cake in the Feed
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds
  • Reduced internal wear and tear
  • Best Quality of Oil & Cake
  • Maintenance is less & easy
  • Hardened Worm Assembly
  • Cast Iron Bodies: For perfect alignment and stability
  • Steel Fabricated Base

Chamber Fabricated chamber
HP 3 Phase 30 HP Motor
Capacity 8 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Palm Kernel Oil Extracting Machine

Our company holds immense experience in this domain and is involved in offering wide assortment of Palm Kernel Oil Extracting Machine to our patrons. Offered Palm Kernel Oil Extracting Machine is widely demanded by our clients for its user friendly operations and less maintenance. This product is highly reliable in nature.


  • GearBox: Double reduction Gear box
  • Kettle / Cooker: Multi stage cooker for the conditioning of seeds
  • Chamber: Vertical Hinged and can very easily be opened for replacement of worms or cage bars. This saves a lot of time and labour
  • Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars
  • Bearings: Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
  • Compressing: Crammer Shaft gives extra Cramming of the seed or cake in the Feed
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds
  • Reduced internal wear and tear
  • Best Quality of Oil & Cake
  • Maintenance is less & easy
  • Hardened Worm Assembly
  • Cast Iron Bodies: For perfect alignment and stability
  • Steel Fabricated Base

Chamber Fabricated chamber
HP 3 Phase 40 HP Motor
Capacity 15 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Palm Kernel Oil Expeller

Leveraging over the skills of our qualified team of professionals, we are instrumental in offering wide range of Palm Kernel Oil Expeller to our customers. We manufacture this Palm Kernel Oil Expeller by using top notch quality raw material in compliance with set industrial norms. These products are timely delivered by us to our patrons.


  • GearBox: Double reduction Gear box
  • Kettle / Cooker: Multi stage cooker for the conditioning of seeds, size 42" Diameter
  • Chamber: Vertical Hinged and can very easily be opened for replacement of worms or cage bars. This saves a lot of time and labour
  • Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars
  • Bearings: Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
  • Compressing: Crammer Shaft gives extra Cramming of the seed or cake in the Feed
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds
  • Reduced internal wear and tear
  • Best Quality of Oil & Cake
  • Maintenance is less & easy
  • Hardened Worm Assembly
  • Cast Iron Bodies: For perfect alignment and stability
  • Steel Fabricated Base

Chamber Fabricated chamber
HP 3 Phase 30 HP Motor
Capacity 10 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Peanut Oil Press

We have carved a niche amongst the most trusted names in this business, engaged in offering comprehensive range of Peanut Oil Press to our customers. This Peanut Oil Press is abrasion resistant and highly appreciated amongst clients for its high tensile strength. Offered product is cost effective in nature.


  • GearBox: Double reduction Gear box
  • Kettle / Cooker: Multi stage cooker for the conditioning of seeds, size 42" Diameter
  • Chamber: Vertical Hinged and can very easily be opened for replacement of worms or cage bars. This saves a lot of time and labour
  • Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars
  • Bearings: Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
  • Compressing: Crammer Shaft gives extra Cramming of the seed or cake in the Feed
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds
  • Reduced internal wear and tear
  • Best Quality of Oil & Cake
  • Maintenance is less & easy
  • Hardened Worm Assembly
  • Cast Iron Bodies: For perfect alignment and stability
  • Steel Fabricated Base

Chamber Fabricated chamber
HP 3 Phase 30 HP Motor
Capacity 10 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Peanut Oil Making Machine

In order to keep pace with the never ending demands of customers, we are involved into offering wide range of Peanut Oil Making Machine. This Peanut Oil Making Machine is widely acknowledged amongst customers for its high efficiency and reliability as it performs every operation in hassle free manner. Offered product is quality approved.


  • Vertical Hinged Chambers: Pressing Box eliminates
    the difficult task of removing box for replacement of worms
  • Chambers: Reduces time and labour for relining of Cage Bars
  • The main Shaft of the Expeller is of alloy steel construction, fitted with High Pressure Worms, hard faced, with a highly wear resistant alloy
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn easily without disturbing the gear section. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Gear Box & Lubrication: Triple helical gear unit made from most suitable special steel, running in oil bath. All shafts run on antifriction bearings. Drive housing is oil tight and dust proof, totally enclosed design and is fitted with level indicator. A self contained lubrication arrangement has been provided
  • Kettle / Cooker: Multistage vertical stack cooker for proper conditioning of the seeds
  • Lower Operation and Maintenance Cost: Due to sturdy construction and stringent quality norms our machines work with higher efficiency and incur lower maintenance costs
  • Premium expelled Oil Quality: Well designed worm assembly and chamber construction ensures superior quality of expelled oil
  • Superior Quality of Cake: The cake quality is excellent and cake produced from the machine is of natural colour without charring or burning effect
  • Power: The power required is 3-Phase 50 H.P. Motor
  • Capacity: The crushing capacity is 15 to 16 Tons per 24 hours

Chamber Fabricated chamber
HP HP
Capacity 1 to 2 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Screw Oil Expeller

To meet the various requirements of the customers, we are involved in offering a wide assortment of Screw Oil Expeller. This Screw Oil Expeller is manufactured under the guidance of our experienced professionals, who hold several years of working experience from the respective domain. We offer these products at most competitive prices.


  • GearBox: Double reduction Gear box
  • Kettle / Cooker: Multi stage cooker for the conditioning of seeds
  • Chamber: Vertical Hinged and can very easily be opened for replacement of worms or cage bars. This saves a lot of time and labour
  • Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars
  • Bearings: Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
  • Compressing: Crammer Shaft gives extra Cramming of the seed or cake in the Feed
  • Shaft Withdrawal: The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
  • Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds
  • Reduced internal wear and tear
  • Best Quality of Oil & Cake
  • Maintenance is less & easy
  • Hardened Worm Assembly
  • Cast Iron Bodies: For perfect alignment and stability
  • Steel Fabricated Base

Chamber Fabricated chamber
HP 3 Phase 40 HP Motor
Capacity 15 TON / 24 Hour

*Capacity differs with material density & quantity of oil in it.




Screw Oil Press Machine

Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of Screw Oil Press Machine to our customers. This Screw Oil Press Machine provides flawless performance and requires minimum maintenance. We do shipment of this product as per our client’s requirement in given time frame.


    • Steel: Each of 36″ Long Eliminates the difficult task of removing box for replacement of worms
    • Steel Casted Chambers: Reduces time and labour for relining of Cage Bars The main Shaft of the Expeller is of alloy steel construction, fitted with High Pressure Worms, hard faced, with a highly wear resistant alloy
    • Shaft Withdrawal: The main Worm Shaft can be withdrawn easily without disturbing the gear section. The thrust of the pressure worms is taken upon large spherical roller thrust bearings
    • Gear Box & Lubrication: An improved triple helical parallel shaft gear unit made from most suitable special steel, running in oil bath. All shafts run on antifriction bearings. Drive housing is oil tight and dust proof, totally enclosed design and is fitted with level indicator. A self contained lubrication arrangement has been provided
    • Kettle / Cooker: Multistage vertical stack cooker for proper conditioning of the seeds
    • Lower operation and maintenance cost: Due to sturdy construction and stringent quality norms our machines work with higher efficiency and incur lower maintenance costs
    • Premium expelled oil quality: Well designed worm assembly and chamber construction ensures superior quality of expelled oil
    • Superior Quality of Cake: The cake quality is excellent and cake produced from the machine is of natural colour without charring or burning effect
    • Retention of oil in cake: Superior process parameters ensure accurate retention of oil in the cake
    • Power: The power required is 3-Phase 170 H.P. Motor
    • Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing

Cooker / Cooking Vessel:

Brief Outstanding Features
Cookers / Heating Kettles are used for proper heating and conditioning of the oil seeds prior to expelling.Controlled heat and moisture open up the oil bearing cells for maximum oil yield.

Construction
These Cookers are all steel fabricated with steam heated jackets for each compartment. These jackets are suitably welded with studs and hydraulically tested before assembly. All compartments except the top one are provided with hinged doors for easy access.

Heating
Steam jackets are indirectly heated by steam and cookers are complete with necessary fittings i.e. valves, pressure gauges, relief valves, steam traps and thermometer. Bottom stage insulation of the Cookers avoids unnecessary heat losses. Insulation can be provided at extra cost.

Moisture Addition
Open steam spray is provided for bottom compartment of smaller cookers and for other sizes at the top and bottom compartments.

Control
Seed temperature, retention time in each stage, moisture content and depth are easily controlled.

Drive
The vertical shaft carries biparted agitators for each compartment and is driven from an independent electric motor through V-Belt and vertical cooled worm type speed reduction gear box.

Steam Consumption
Higher figures are for starting up and the lower figures are for steady running.

Dia x Ht.(mm) No. of Compartments Total Heating area
in Sq. M
Total volume Cu. M. Steam Consump. Kg/hr. Steam Pressure Kg/cm2 Motorsmain drive H.P. Exhaust FanMotor H.P. Main Drive
1676×2438 5 11.035 6.23 160 8 20 1.5 V. Belt &Gear Box

*Capacity differs with material density & quantity of oil in it.





Looking for Product Name ?