Worldwide Installations

Shreeji Expeller Industries

Facebook Twitter Pinterest

Estd. 1992

Manufacture & Exporter of Oil Mill Machinery & Vegetable Oil Refinery Plant

Shreeji Expeller IndustriesShreeji Expeller Industries

Home » Products » Oil Expeller / Oil Screw Press » Oil Expeller VK 10 (1 to 2 TPD)

Oil Expeller VK 10

Oil Expeller VK 10 (1 to 2 TPD) is an effective solution for small time oil expelling operations which require moderate crushing capacity. With its box type construction, this type of oil expeller can sustain any type of shock load.


  • The main cage is flexible in opening
  • The oil extraction is possible from all the known varieties of oil seeds
  • Superior quality of oil and cake
  • Less maintenance required
  • Low initial investment
  • Easy to install
  • High yield at low operating cost
  • Reduced wear and tear of parts
  • Can bear shock load

Model of Expeller SHREEJI VK-10
Chamber Fabricated chamber
HP 10 HP
Capacity 1 to 2 TON / 24 Hour
Feeding Drum Single stage and double stage with & without heating arrangement
Construction Material Cast iron body and base
Chamber Size 20" long x 3 1/2" diameter
Gear Box Single reduction gear box with spur gears
Assembly Case hardened worm assembly

*Capacity differs with material density & quantity of oil in it.




Oil Expeller VK 20

Oil Expeller VK 20 (3 to 4 TPD) is integrated with advanced technology with the capacity of 3 to 4 tons. Along with low initial investment, it also ensures high yield of the best quality oil and cake at low operating cost.


  • Main cage is flexible to open
  • Easy and low maintenance
  • Easy in installation
  • Low cost investment
  • Can extract oil from all oil seeds
  • Extract best quality cake and oil
  • Rust proof cast iron body
  • Shock proof
  • Box type construction

Model of Expeller SHREEJI VK-20
Chamber Fabricated chamber
HP 20 HP
Capacity 3 to 4 TON / 24 Hour
Feeding Drum Single stage or double stage with & without heating arrangement (as required)
Construction Material Cast iron body and base
Chamber Size 24" long x 4" diameter
Gear Box Single reduction gear box with spur gears
Assembly Case hardened worm assembly

*Capacity differs with material density & quantity of oil in it.




Oil Expeller VK 50

Oil Expeller VK 50 (5 to 6 TPD) is an innovative solution and next generation solution for oil extraction industry. There is integrated a steel fabricated vertical chamber in the oil expeller that makes it easy to replace the worms and also saves the time and labor for relining the cage bars.


  • Single stage cooker for the conditioning of seeds
  • Vertical chamber is easy to open for replacement of worms or cage bars
  • Ball and roller bearings for low noise operation
  • Steel chamber saves the time on relining cage bars
  • Easy and quick to install
  • High yield at low operating cost
  • Initial investment is low
  • Extract oil from all known seeds
  • Reduced internal wear and tear

Model of Expeller SHREEJI VK-50
Chamber Fabricated chamber
HP 20 HP
Capacity 5 to 6 TON / 24 Hour
Gear box Double reduction gear box
Kettle/cooker size 26"
Assembly Hardened worm assembly
Construction Material Cast iron
Bearings Heavy duty ball and roller bearings




Oil Expeller VK 100

Oil Expeller VK 100 (8 TPD) is a fully developed machine with reduced internal wear and tear of parts. With the capability of extracting oil from all known seeds, this expeller is attached with spherical roller thrust bearings for absorbing the load of pressure worms while changing them.


  • Multi stage cooker for the conditioning of seeds
  • Crammer Shaft for extra cramming of the seed or cake in the feed
  • Replacement of worms is easy with vertical hinged chamber
  • Reduced time for relining cage bars
  • Bearings for low noise operation
  • Easy shaft withdrawal without disturbing the gear section
  • Perfect alignment and stability
  • Best quality of oil and cake from all known oil seeds
  • Less maintenance
  • High yield at low operating cost

Model of Expeller SHREEJI VK-100
Chamber Fabricated chamber
HP 3 Phase 30 HP Motor
Capacity 8 TON / 24 Hour
Gear Box Double reduction Gear box
Kettle / Cooker Multi stage cooker of size 42" diameter
Chamber Steel fabricated and vertical hinged of size 37" x 6"
Bearings Heavy duty ball and roller bearings
Construction Cast iron body
Assembly Hardened worm assembly
Overall machine dimensions (LxWxH) 2175mm(7'2") x 1200 mm(3'11") x 2200mm(7'3")




Oil Milling Plant

Oil Milling Plant offered by us proves to be an innovative solution, specially designed keeping the need of oil extraction industry in mind. Vertical chamber fabricated with steel is integrated in Oil Milling Plant we offer, that ensures convenient replacement of worms by saving the labor cost and time that could be wasted in relining of cage bars. Purchasing of our range will come up with the additional features such as minimum power consumption, better filtration, burning of a cake without damaging protein and many more.


  • Single stage cooker for the conditioning of seeds
  • Vertical chamber is easy to open for replacement of worms or cage bars
  • Ball and roller bearings for low noise operation
  • Steel chamber saves the time on relining cage bars
  • Easy and quick to install
  • High yield at low operating cost
  • Initial investment is low
  • Extract oil from all known seeds
  • Reduced internal wear and tear

Chamber Fabricated chamber
HP 20 HP
Capacity 5 to 6 TON / 24 Hour
Gear Box Double reduction gear box
Kettle / Cooker 26"
Assembly Hardened worm assembly
Construction Material Cast iron
Bearings Heavy duty ball and roller bearings




Oil Expeller Viraat SE I

Oil Expeller Viraat SE I (8 to 10 TPD) is specially developed and engineered with a hard faced pressure cone that positively control the final pressure of cake. In this expeller, the cake thickness is manually controlled with a simple hand-wheel in which choke gear does not depend on the main drive and thus no risk of sudden load on expeller motor.

For reducing the labor cost, the expeller feed is made automatic with integrated small crammer-shaft and tensioned belt which automatically stops in case of excessive feed and starts in case the expeller has absorbed the feed.


  • All steel fabrication for perfect alignment and stability
  • Vertical hinged section reduces the time in relining and replacement of worms
  • Worm shaft can be withdrawn easily without disturbing gear section
  • Manually operated hand-wheel for controlling the thickness of cake
  • Pressure worms and spacing collars can be changed without disturbing the shaft
  • Fully automatic expeller feed which stops when fully loaded and starts when empty
  • Oil tight and dust proof drive housing
  • Totally enclosed design with two oil level indicators
  • All shafts run on anti-friction bearings
  • Pipeline is fitted with safety valve, steam spray arrangement, steam traps, steam pressure gauge and steam valves
  • Kettle fitted with self controlled mean inlet to prevent overflowing

Model of Expeller SHREEJI Viraat SE I
Chamber Steel fabricated chamber
HP 15HP/20HP (for cooker 3HP)
Capacity 8/10 tons in first pressing and 5/6 tons in second pressing

  • Vertical hinged 34" three-section pressing box
  • Double helical gear unit made from special steel
  • Kettle/cooker with two high steam jackets of adequate capacity with 42" dia
  • Kettle requires 40-55 kgs. process steam per hour at a pressure of 4-5 kg/cm2
  • Hard faced pressure cone for controlling the pressure of cake




Oil Expeller Viraat SE II

Oil Expeller Viraat SE II (15 TPD) is integrated with an automatically controlled expeller feed in which a small crammer-shaft and tensioned belt is integrated. The belt automatically stops when the expeller is loaded with the seed feed and start as soon as it absorbs the entire feed. In order to control the pressure of cake, there is introduced a hard faced pressure cone in the oil expeller. There is a manually operated simple hand-wheel for adjusting the thickness of cake. The design of the hand-wheel is quite simple in which the choke is independent of the main drive posing no risk of a load on the expeller motor.


  • Worm shaft can be withdrawn easily without disturbing gear section
  • Manually operated hand-wheel for controlling the thickness of cake
  • Steel fabrication and improved design for perfect alignment and stability
  • Vertical hinged section reduces the time in relining and replacement of worms
  • Oil tight and dust proof drive housing
  • Totally enclosed design with two oil level indicators
  • Pressure worms and spacing collars can be changed without disturbing the shaft
  • Fully automatic expeller feed which stops when fully loaded and starts when empty
  • All shafts run on anti-friction bearings
  • Hard faced pressure cone for controlling the pressure of cake
  • Pipeline is fitted with safety valve, steam spray arrangement, steam traps, steam pressure gauge and steam valves
  • Kettle fitted with self controlled mean inlet to prevent overflowing
  • Kettle fitted with two high steam jackets of adequate capacity

Model of Expeller SHREEJI Viraat SE II
Chamber Steel fabricated chamber
HP 30HP (for cooker 5HP)
Capacity 14/15 tons in first pressing and 8/10 tons in second pressing
Pressing box Vertical hinged 44" four-section pressing box
Gear unit Double helical gear unit made from special steel
Kettle/Cooker 48" dia
Kettle Requires 100/120 lbs of process steam per hour at a pressure of 60 lbs. per square inch.




Oil Production Plant

Equipped with heavy duty bearing and advanced 3 phase motor, we bring forth the technically advanced range of Oil Production Plant. Known for its low noise and improved performance, demand for the products we provide is increasing on a rapid rate. Roller bearings attached with the machine absorbs entire thrust exerted by the worms, collars and pressure worms are withdrawn without disturbing the shafts and gear sections.


  • Multi stage cooker for conditioning seeds
  • Extra cramming of seeds and cake in feed is given by crammer shaft
  • Vertical hinged chamber is easy to open
  • Reduced labor cost and time for replacement and lining of worms
  • Low noise operation with roller and heavy duty ball bearings
  • No disturbance on the gear section while withdrawing worm shaft
  • Spherical roller bearings for absorbing the thrust of pressure worms
  • Cast iron constructed body for perfect alignment and stability
  • Capable of extracting oil from all known oil seeds
  • No wear and tear of internal parts
  • Best quality cake and oil
  • Requires less maintenance

Chamber Fabricated chamber
HP 3 Phase 30 HP Motor
Capacity 10 TON / 24 Hour
Kettle / Cooker Multi stage cooker of size 42" diameter
Gear Box Double reduction gear box
Bearings Heavy duty ball and roller bearings
Assembly Hardened worm assembly
Construction Cast iron body
Base Steel made


Looking for Product Name ?